[https://www.patreon.com/cw/3D_MENTIEL](https://www.patreon.com/cw/3D_MENTIEL)

Si vous aimez mon travail, venez faire un tour sur mon Patreon

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 199.98x199.98mm in size

You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.16mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.2
    #d70610 PLA Forshape+ Red  Transmission Distance: 3.6
    #ffffff PLA Default White  Transmission Distance: 5
This print uses 3 unique filaments

Instructions de changements:
    Commencer par Black
    At layer #11 (0.96mm) swap to Red
    At layer #16 (1.36mm) swap to White pour le reste.