【万物皆可扭】一键生成扭扭解压玩具！神奇建模切刀 / [Twist Everything] One-Click Twisty Fidget Toy Generator! Magic Modeling Slicer

📝 模型简介 / Model Introduction

想要把任何普通的3D模型变成好玩的螺旋扭扭解压玩具吗？这个“建模切刀”工具正是为你准备的！只需简单的布尔运算，就能赋予任何静态形状全新的动态灵魂。无论是基础几何体还是复杂的小物件，一键切片，立刻解压！

Want to turn any ordinary 3D model into a fun, twisty fidget toy? This "Modeling Slicer" tool is exactly what you need! With simple Boolean operations, you can give any static shape a brand new dynamic soul. Whether it's a basic geometric shape or a complex little object, slice it with one click and start fidgeting!

🛠️ 使用教程 / Step-by-Step Tutorial

只需简单的 6 步，即可生成你的专属扭扭玩具： Follow these 6 simple steps to generate your custom twisty toy:

1. 导入模型 / Import the model 导入你要变形的目标模型。 Import the target model you want to deform into the software.

2. 调整大小 / Adjust the size 缩放你导入的模型。注意： 目标模型的主要边缘必须被切刀文件完全包裹，也就是说，你的模型不能比切刀大。 Scale your imported model. Note: The main edges of your model must be completely enveloped by the slicer file, meaning your target model cannot be larger than the slicer.

3. 对准中心 / Align the centers 将两个模型的中心完全对齐。（💡 技巧/Tip： 分别使用软件的“居中”功能，将目标模型和切刀各自居中即可完美对齐）。 Align the centers of both models perfectly. (💡 Tip: Simply use the "Center" function in your software to center both the target model and the slicer individually).

4. 组合模型 / Combine the models 将这两个模型全选并组合（Group）在一起。 Select both models and combine (Group) them together.

5. 布尔运算 / Boolean operation 选择“布尔 (Boolean)”命令，并在运算选项中选择“差集 (Difference / Subtract)”（具体操作请参考下方示意图👇）。 Select the "Boolean" command, and choose "Difference" (or Subtract) in the operation options (Please refer to the reference image below 👇).

6. 确认生成 / Confirm and Generate 点击确定（Apply），你的专属扭扭解压玩具就生成完毕了！现在可以开始切片打印啦。 Click confirm/apply. Your custom twisty fidget toy is now ready! You can now slice and print it.

(💡 发布提示：请在此处插入一张您软件中“布尔-差集”操作的截图，以呼应第5步的“如下图” / Note for publisher: Please insert a screenshot of your software's "Boolean-Difference" operation here to match step 5)

⚙️ 打印建议 / Printing Recommendations

• 材质 / Material: 推荐使用 PLA 或 PETG，以获得最佳的层间滑动体验。/ PLA or PETG is recommended for the best smooth sliding experience between layers.
• 层高 / Layer Height: 0.2mm
• 支撑 / Supports: 无需支撑 / No supports required.

欢迎在评论区分享你“切”出来的独特作品！ Welcome to share the unique creations you "sliced" in the comments section!