（中文）东方明珠塔1：3000模型

该模型约高150毫米，打印时最好使用PETG HF材料，否则部分过细的地方容易破损，要用树状支撑（自动）。

打印时间约2时，耗材20.20g，颜色可以自己选择。

（注意：塔顶的天线太细，可能打印机不会打印该部分，可以把刚开始在热床上喷出的废料中截取一部分粘上去。）

打印时的数据放在上面了，可以自行浏览。

（English）The 1:3000 scale model of Oriental Pearl Tower measures approximately 150 mm in height. For optimal printing results, use PETG HF material to prevent damage from overly thin sections. A tree-like support structure is recommended (automatic).
The printing time is approximately 2 hours, with 20.20g of consumables required. You can choose your preferred color.
(Note: The antenna at the tower top is too thin, so the printer might not print this section. You can cut and paste a portion from the initial waste material sprayed on the hot bed.) The printing data is displayed above for your reference.