We have printed and tested these models with the software and print settings below. Please note that results may vary depending on individual settings. We encourage any modification to these models as you see fit! Happy Printing!

🧲Magnet Placement Pause

These prints include a pause for inserting 8×2mm round magnets.
These are the ones we use→ [https://amzn.to/46b4go9](https://amzn.to/46b4go9)
If you prefer no magnets, simply delete the pause and let it run through!

🎨 AMS Color Change Pause
There is a second pause for AMS color switching on some models. Below we’ve included the slicer settings but feel free to remix, recolor, or run single-color. Make it your own and share — no rules here! See these models printed to get fresh ideas for yourself over on our vlog on Youtube @ Hamill's House of 3D Prints!

Printers Used:
Bambu Lab A1 / P1 Series
Flashforge AD5X

Material: PLA

⚙ Quality

• Layer Height: 0.16mm

💪 Strength

• Walls: 3
• Infill: 10%
• Pattern: Gyroid

🚀 Speed

• Outer Wall: 200 mm/s
• Inner Wall: 200 mm/s
• Sparse Infill: 200 mm/s
• Internal Solid Fill: 200 mm/s
• Overhang Speeds: 20 / 20 / 20

🌳 Supports

• Type: Tree
• Style: Default
• Support Angle: 30°
• On Build Plate Only: Yes
• Top Z Distance: 0.24
• Bottom Z Distance: 0.24
• Base Pattern: Hollow

🔧 Other Settings

• No Brim
• Flush into Object Support: No
• Flush Multiplier: 1.3x

(All settings are suggestions — you’re free to modify anything you like.)