Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 90x160mm in size
You may print at higher layer heights below the Min Depth of 0.88mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 3.9
PLA BambuLab Basic Orange Transmission Distance: 6.9
PLA BambuLab Basic Yellow Transmission Distance: 5.9
PLA BambuLab Basic Jade White Transmission Distance: 4.7
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Red
At layer #20 (1.68mm) swap to Orange
At layer #22 (1.84mm) swap to Yellow
At layer #25 (2.08mm) swap to Jade White for the rest.
