### Universal Parametric Pegboard Hook Standard hooks often don't fit perfectly or break easily. This fully parametric design solves both problems! **💡 Why this desig🛠️ The Ultimate Parametric Pegboard Hook (Skadis & Standard)

Stop printing weak hooks that snap under load! This is the last hook generator you will ever need. Whether you have an IKEA Skådis or a standard 25mm/1-inch pegboard, this OpenSCAD script generates the perfect, heavy-duty holder for your tools.

💡 Why This Design Rocks

• Physics-Based Strength: Designed to be printed flat on its side. This aligns the layer lines with the stress vector, making the hook nearly indestructible under normal load. No more snapping layers!
• Fully Parametric: Don't settle for "almost fits." Adjust length, angle, thickness, and even the board type directly in the Customizer.
• Universal Compatibility: Supports Metric (25mm), Imperial (1 inch), and IKEA Skådis systems out of the box.

⚙️ How to Customize (It's Easy!)

Click the green "Customize" button above to launch the MakerWorld App. No coding required!

1. Board Type: Select Skadis or Standard (Round holes).
2. Hook Length: Need a short stub for keys or a 100mm rod for cable coils? You decide.
3. Hook Angle: Tilt it up (e.g., 10-15°) to keep tools from sliding off by gravity.
4. Thickness: Increase for heavy tools (hammers, drills), decrease for lightweight items.

🖨️ Print Settings (The Secret Sauce)

For maximum durability, follow these recommendations:

• Orientation: 🛑 PRINT FLAT! (The file is already oriented correctly). Do not stand it up.
• Material: PLA is fine, PETG/ASA is recommended for flexibility and impact resistance.
• Walls/Perimeters: 3-4 walls (This is where the strength comes from).
• Infill: 20-30% Gyroid or Grid.
• Supports: NONE. The design is optimized for bridge-free, support-free printing.

📝 Notes for Skådis Users

The Skådis hook features a special locking geometry. It slides in and "locks" upwards behind the board.

• If the fit is too tight, adjust the Pin Tolerance in the Customizer (e.g., set to -0.1mm).
• If it wobbles, set Pin Tolerance to +0.1mm.

Happy Organizing! If you like this tool, please leave a boost 🚀 and share your make!