Printing Settings:

Recommended printing material: PLA or PETG.

Layer height: 0.2mm for a balance of speed and quality.

Infill density: 20-30% for a sturdy print.

Print speed: 40-60mm/s for good results.

Support structures: Depending on model complexity, enable supports as needed.

Bed adhesion: Use a heated bed at around 60°C for better adhesion.

Printing temperature: Start with 200-220°C for PLA or 230-250°C for PETG.

Printing Process:

Start the printing process and monitor the first layer for adhesion.

Ensure that the print is progressing smoothly and adjust settings if necessary.

Once the print is complete, allow the model to cool before removing it from the print bed.

Clean up any support structures or rough edges carefully for a polished finish.

Post-Processing (Optional):

Sand any rough surfaces gently for a smooth finish.