Please let me know if there is anyway I can improve this one.

Project: DeadPool_V1_Red.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 122.34x162.6mm in size

You may print at higher layer heights below the Base Thickness of 1.52mm
The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mm

    #000000 PLA Sunlu Meta Black  Transmission Distance: 1
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #ffffff PLA Sunlu Meta White  Transmission Distance: 8
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #22 (1.84mm) swap to Red
    At layer #33 (2.72mm) swap to White

Border Only Colors from here until the end.
    At layer #43 (3.52mm) swap to Black for the rest.