Recommended Settings

• Layer Height: 0.2mm (balanced strength and surface finish)
• Walls/Perimeters: 4
• Top/Bottom Layers: 5
• Infill: 40% (Gyroid or Grid recommended)
• Supports: Not required
• Brim: Not required

Material Recommendations

• PLA – Easy to print and perfect for general-purpose scraping
• PETG – More durable and higher heat resistance

Print Orientation

Print flat on the large base surface (as modeled). This ensures:

• Maximum strength along the handle
• Clean scraping edge
• No supports required

Strength Notes

The hollow design keeps the scraper lightweight while maintaining rigidity. The increased wall count and infill ensure the handle remains strong under pressure.