Panda Perch Bins

A pair of sturdy 3‑D‑printable bins that lock directly into the hexagonal‑pattern holes on the side of the BIQU Panda Perch for Bambu Lab printers. Each bin measures 164 mm long × 60 mm deep and is offered in two heights—60 mm and 90 mm—so you can choose the capacity that best fits your workflow. Each bin uses two connector points; the print‑in‑place nuts are supplied and must be inserted from inside the Panda Perch before the shelves are snapped on from the outside.

📚 Editions

Two printable editions are available:

Classic Edition
Compartmentalised Edition – giving you two compartments per bin for more flexibility.

Choose the edition that best fits your needs.

📦 What’s Included

Item	Size / Notes
Bin – Classic (60 mm height)	164 mm × 60 mm × 60 mm
Bin – Compartmentalised (60 mm height)	164 mm × 60 mm × 60 mm (two side‑by‑side compartments)
Bin – Classic (90 mm height)	164 mm × 60 mm × 90 mm
Bin – Compartmentalised (90 mm height)	164 mm × 60 mm × 90 mm (two side‑by‑side compartments)
Printable nuts (for the perch’s hexagonal holes)	Clone as needed

All files embed the recommended slicer settings; do not modify them.

🛠️ Printing Recommendations

Use the supplied profiles unchanged – they have been calibrated for optimal strength, dimensional accuracy and a clean finish on the filament you choose (PLA or PETG). A clean build plate is required.

If you still encounter warping on the large bin I recommend raising the bed temperature and adding a brim.

⚡ Quick‑Start Tip

Load the profile, start the print with the pre-configured settings, and let the printer finish. After printing, remove supports, insert four printed nuts from inside the Panda Perch, then snap the bin onto the hexagonal holes from the outside. No further adjustments are required – the bin is ready to catch filament scraps, tools, or other accessories immediately.

🔗 Related Models

If you need additional workspace, storage or other holders alongside, check out the Panda Perch Add-ons collection, which attach to the same hexagonal holes on the perch.