The Elevated Wine Box V1

The perfect addition to every home bar!

This Wine Box uses the standard 3 Liter wine bags that come in common boxed wines.  Buy the wine - toss the cardboard box!

This is designed to be used with stemless wine glasses - a wine glass with a stem will be too tall.

Let me know if you would like a taller base to be used with taller wine glasses.

Base has built in storage to hold taps and tap twelve handles.

(available at [https://makerworld.com/en/models/2373488-the-wine-tap-v2#profileId-2597993](https://makerworld.com/en/models/2373488-the-wine-tap-v2#profileId-2597993))

Easy to remove tap handle storage!

Supports Igloo Maxcold Ice Block:

[https://www.amazon.com/dp/B00HWIHMFY](https://www.amazon.com/dp/B00HWIHMFY)

This allows you to chill a wine and then keep it chilled for longer while in the wine box.

If you are using the box without an ice pack simply insert the ice pack cover without the ice pack.

Drip tray is removable for easy cleaning.  I printed it in TPU for easy cleaning however it can be printed in your filament of choice.

I have printed this on a couple different printers and everything has gone together correctly - a tight fit but not too tight.

Please let me know if you run into any issues so I can make adjustments as needed.

This design does not have any supports to remove!

Profile is designed with 2 walls for a quicker print that uses less filament however you will see the infill as part of the print (looks like a design in the print).  You can increase the walls to 3 or 4 to limit the infill design showing on the outside of the wine box.  Doing so will add to the time it takes to print all of the pieces as well as the amount of filament you will use.

Please let me know if you would like to see any improvements!