Modular under-desk drawers designed specifically for 3D printing, with a strong focus on parametric flexibility, strength, and easy installation.
The model allows you to set the internal drawer dimensions directly in Onshape, so you can print exactly the size you need—no compromises and no manual STL editing.

Individual modules can be connected into assemblies of 2–N units, creating a compact and clean storage system under a desk, workbench, or any other flat surface.

The design includes a locking pin that prevents the drawer from being pulled completely out—simple, robust, and very practical for daily use.
 

🔥 Parametric. Modular. Exclusive.
Designed for makers who want full control over their dimensions.

🔧 Key Features

• Fully parametric model – adjustable internal width / depth / height
• EXCLUSIVE Onshape project (original model is read-only)
• Modular system – connect 2–N drawer modules side by side
• Drawer locking pin to prevent full pull-out
• Mounting using Ø 3 mm screws (minimum length 10 mm)
• Designed specifically for 3D printing

🧠 Parametric Onshape Model (EXCLUSIVE ACCESS)

• This project includes a link to an Onshape document provided as read-only, preserving the exclusive nature of the original design.
• 👉 To customize the model:
• Open the Onshape project link
• Click “Make a copy”
• Edit the parameters in your own copy (internal dimensions, module setup, etc.)
• Export STL / 3MF files tailored to your needs
• 🔹 Why this approach?
• Always up-to-date source model
• No hacking or editing STL files
• Maximum flexibility with clean geometry
• Full parametric control with exclusive access
  
  [https://cad.onshape.com/documents/a74a70e7c2acac08e8b7d30e/w/2e759621b0527b63f738b9db/e/59f412fc51de71b2614b0c6b?renderMode=0&uiState=6988a21be7e6151d39b78084](https://cad.onshape.com/documents/a74a70e7c2acac08e8b7d30e/w/2e759621b0527b63f738b9db/e/59f412fc51de71b2614b0c6b?renderMode=0&uiState=6988a21be7e6151d39b78084)

🖨️ Recommended Print Settings

• Perimeters (walls):
  👉 3 or more perimeters (recommended)
• Infill:
  👉 Minimum 20%
  👉 Recommended 30–50%
  👉 Maximum ~80% (higher brings little benefit)
• Layer height: 0.16–0.28 mm
• Supports: minimal
• Material:
  • PLA – easy to print
  • PETG – higher strength and durability (recommended)

🧩 Assembly Instructions

1️⃣ Module Connection

Connect individual modules into the desired assembly (2–N units).

2️⃣ Insert Drawers & Locking Pin

• Slide the drawers into the modules
• Insert the locking pin, which prevents the drawer from being pulled out completely

3️⃣ Mounting Under the Desk

• Attach the completed assembly to the underside of a desk, workbench, or any flat surface
• Use Ø 3 mm screws, minimum length 10 mm
• Mounting holes are integrated into each module

📐 Use Cases

• Office supplies
• Small tools
• Electronics and cables
• Hobby and maker projects