Busy Bee Bookmark Set

Continuing with the floral theme. This one pay homage to its pollinators.

Note: I've added a tassel hole for your convenience, which is on plate 1

Bee Pollinating Set

Pictures shown are printed in an 0.4mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Orange Transmission Distance: 7

PLA BambuLab Basic Sunflower Yellow Transmission Distance: 8.5

PLA BambuLab Basic Jade White Transmission Distance: 4.6

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer (0.88mm) swap to Orange

At layer (1.12mm) swap to Sunflower Yellow

At layer (1.36mm) swap to Jade White for the rest.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.

Descrição