First try of my T-Pull for the Dart Zone Max Nitroshot+ Volcanic Pro.
It is just a simple T-Pull so far. 
There are 2 Version.
-First Version uses a M5x50mm Takedown pin. This Version is recommended.
-Second Version uses a Screw (e.g. M3x30). You need the screw to fix the T-Pull in place at the back. The screw threads directly into the PLA. Please use the small pipe/sleve because the M3 Screw has a to small diameter to reach the pull handle.

You also need 2 of the original screws for the front in the front of the T-Pull.