Free for personal printing use only.
 

Exclusive projects and commercial license available at Patreon.com/StrataPrints — your support keeps new designs coming! Check out the Zero Profile print below, available EXCLUSIVELY on Patreon!

Project: megaman face.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 188.05x235mm in size

You may print at higher layer heights below the Base Thickness of 1.28mm
The Max allowed Thickness is 3.44mm and the Actual Thickness is 3.44mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 3.5
    #ff9016 PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    #e4bd68 PLA BambuLab Basic Gold  Transmission Distance: 3
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5
    #ff5869 PLA BambuLab Basic Pink  Transmission Distance: 8
This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #18 (1.52mm) swap to Blue
    At layer #22 (1.84mm) swap to Cyan
    At layer #30 (2.48mm) swap to Pumpkin Orange
    At layer #31 (2.56mm) swap to Gold
    At layer #33 (2.72mm) swap to Ivory White
    At layer #34 (2.8mm) swap to Pink
    At layer #36 (2.96mm) swap to Cyan
    At layer #38 (3.12mm) swap to Ivory White for the rest.