These are parametric storage boxes for printer accessories or to sort other items.

Create your own box size!

There are three parametric files to adapt the box to your needs: 

• Parametric Box
• Parametric Inlet
• Parametric Lid

Changes can be made in the BambuLab Parametric Model Maker.

Click “Customize”, then select the box, inlet or lid to set your parameters. 

→ Keep the measurements for the inlet and lid the same as for the box to make them fit properly.

Example boxes shown in the images are in the print profile and have the size of 225x15mm.

There are label tags inside the print profile to mark each box and their contents.

The label tag needs to be glued to the box but the plates can be removed and replaced easily. 

With the help of the “Label Tag Tool” (print plate #2) you can center the label tags (print plate #1). 

→ Just measure the center of the box, mark it and put the label tag tool on the marking. 

The text of the label tags are written by hand with a white paint marker. 

On the print plate #3 there is a printed alternative. 

→ Here you need to change the text shape of the object to your text. Use Bambu Studio changing the text.

For questions or suggestions don't hesitate to comment below or to write me a short message. :)