Hueforge Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 47.88x150mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #3f8e43 PLA BambuLab Basic Mistletoe Green  Transmission Distance: 1
    #00ae42 PLA BambuLab Basic BambuLab Green  Transmission Distance: 2
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Mistletoe Green
    At layer #15 (1.28mm) swap to BambuLab Green
    At layer #19 (1.6mm) swap to Yellow for the rest.