AC-DC hueforge

☕ ¿Disfrutando del diseño?
Si encontraste útil este diseño y te gustaría apoyar mi trabajo, ¡no dudes en invitarme a un café!
Enjoying the design?
If you found this design useful and would like to support my work, feel free to buy me a coffee!

[https://buymeacoffee.com/davinchi20](https://buymeacoffee.com/davinchi20)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 100x150mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.28mm

#000000 PLA #BLACK/NEGRO Transmission Distance: 0.8
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 6
This print uses 2 unique filaments

Swap Instructions:
Start with BLACK/NEGRO
At layer #7 (0.72mm) swap to Jade White for the rest.

Descrição