This is a multi-part ceiling lamp designed for use with a smooth socket without a retaining ring.

The modular design allows customization by combining different printed parts and colors.

Technical Specifications

• Recommended layer height: 0.2 mm
• Infill percentage: 15%
• Supports: Not required

Printing / Assembly Instructions

1. Select a smooth socket without a retaining ring.
2. Insert the socket into the main body; the internal diameter is 38.4 mm. A link is provided below.
3. Assemble the printed parts in the desired order and color combination.
4. Optionally add inner white parts to the large ring (part 3) and cone-shaped part (part 4) to increase light reflection.
5. Tighten the main body screw to secure all parts; the oversized thread allows height adjustment.

6. Install either a standard bulb or a globe bulb, depending on the desired lighting effect.

    

   If a different socket diameter is required, request a modified version before printing.

Additional Components

• Smooth E27 socket without retaining ring (affiliate link): [https://amzn.to/4aAqNxg](https://amzn.to/4aAqNxg)