Filaments Used:
 PLA BambuLab Basic Black  
 PLA BambuLab Basic Red  
 PLA BambuLab Basic Gold  
 PLA BambuLab Basic Jade White  

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Red
    At layer #13 (1.12mm) swap to Gold
    At layer #18 (1.52mm) swap to Jade White for the rest.

The Model is 120x200mm in size

You can find the matching Hueforge frame here.

[https://makerworld.com/en/models/2307079-picture-frame-120x200mm#profileId-2518456](https://makerworld.com/en/models/2307079-picture-frame-120x200mm#profileId-2518456)

You need a different size:

Remember, if scaling is desired, modify only the x and y axes; the z-axis must remain unchanged.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 3.52mm and the Actual Thickness is 2.72mm