The only fully 3D printable quick release buckle that can handle any adventure. 

I wanted a quick release keyring accessory to hook onto my work pants for necessity. I know I could have brought one easily, but designing my own would be legendary. I mainly pair it with a carabiner, to hook it onto my work trouser, on the belt loop as a tether. Also when I travel, the buckle hangs on my bag strap very simple, providing me easy access that delivers. 
 

Features: 

- The buckle is designed to be durable.
- It consists of two components. 
- Tested to carry 1.6 kg of water easily. 
- Easy to release and connect.
- Designed to use with keyrings. 
 

Important Information:
 

• The male prongs are designed to be stiff for strength. 
•  I recommend a one time application of either an oil or petroleum jelly (vaseline) to the prongs.
• This will help in the breaking in process. At first the prongs might be really stiff, but with a breaking in period, it will loosen up at bit. 
• To open and close the buckle effectively, a keyring must be installed on both ends for proper leverage. 

Print Profile Information:

• There are two print profiles to choose from. One with supports and the other with no supports. 

• There are 5 plates in each print profile. Each plate has a slight variation of the keyring quick side release buckle with plate 3 being an AMS multi colour print. The illustration below are the two main variations of the keyring quick side release buckle.  Note the orientation of the top keyring hole location and the shape of the bottom male component.