Protective Case for Ozito OBDII Code Reader.

I thought it was strange that it did not come with a case so I made one.

Bottom of case printed at 15% infill, Lid Printed at 7%, both gyroid pattern. I have drop tested it to about 2 meters with no damage to the case.

I would also recommend a cover for the pins, I used this one [https://makerworld.com/en/models/2215130-hyper-tough-ht500-obdii-scan-tool?from=search#profileId-2408305](https://makerworld.com/en/models/2215130-hyper-tough-ht500-obdii-scan-tool?from=search#profileId-2408305) but any will work.

Feel free to comment any adaptations or if you have a similar device I can adapt for that as well.