This is a remix based on the excellent model by Tuny: [https://makerworld.com/en/models/2042852](https://makerworld.com/en/models/2042852)

To re-create a life-size version for display and cosplay, I have scaled the model to approx. 21cm in height.

Due to it's larger size and taller height, I have split the model into 2 parts (connected by a printed dowel rod) so that it requires less supports while retaining better stability during printing, as well as allowing it to be printed within smaller build areas too (ie. A1 Mini).

The tail nozzle has been made hollow (via slicer modifiers), along with a dowel rod and cover piece.

Note that while the majority of the parts print well with standard supports, the bottom frame must be printed with tree supports (otherwise the scaled up overhangs will lose adhesion and sag due to the longer bridge distances). This is already setup in my print profiles.

My example is printed with Bambu Lab Basic PLA Silver, Gold, Light Grey, Red and Bambu Lab Metal Iridium Gold.

The “wires” are made using short lengths of red and blue filaments. Just cut and bend them to shape accordingly.

While I have used a similar color scheme as the original model, do feel free to adjust the colors (or re-paint the parts) of the model to your preference.

Check the photo gallery for an alternative example that I re-painted in the slicer and printed with only 3 colors, ie. Silver, Gold and Light Grey.

If you enjoy these prints, please give a like (or even a boost). Thank you!

Check out the other models in my Arc Raiders related print collection: [https://makerworld.com/collections/14262730](https://makerworld.com/collections/14262730)