Round Bed Scraper (>7 inches of scraping edge)

The Puck is an optimized, round bed scraping tool. The edge geometry has been optimized so it has the proper angle for getting under difficult to remove material while sitting flat on the bed. Profiles have been uploaded for PLA, PETG and ABS. ABS will be the most durable but PETG and PLA also work well. With over 18 cm of usable edge, you can keep rotating the tool to use a fresh area of the scraper.

Key features include:

Over 18 cm (7 in.) of usable scraping edge (compared to less than 5 cm for most scrapers)
Sits flat during use for the perfect angle every time and to reduce bed damage
Uses less than 13g of filament

Build Plate Note:

Use the flattest build plate possible to print the model. The flatter the build plate, the more even and sharp the edge will be. The Bambu Super Tack plate works well for PLA and PETG and smooth PEI is good for ABS.

Descrição