Overview:

That outlet wasn’t doing anything useful anyway.
Outlet Shelf Pro turns a standard wall outlet into a clean, practical mini shelf for phones, remotes, wallets, keys, or whatever usually ends up lost. No drilling, no adhesives, no clutter just smart use of wasted space.

What This Is:

• A plug cover replacement with an integrated shelf
• Mounts to a standard US duplex outlet using the existing center screw
• Clean, low-profile design that sits flush and level
• Single-piece print with built-in strength where it matters

Ideal for bedrooms, kitchens, offices, workshops, or anywhere counter space is tight.

Supports & Removal Notes

• Designed to print with minimal supports
• Remove carefully while the print is still warm to avoid flexing the shelf edge
• No post-processing required beyond normal cleanup

If your printer can handle a wall plate, it can handle this.

Important Notes

• Do not over tighten the outlet screw snug is enough
• Designed for standard US duplex outlets only
• Light-duty shelf not intended for heavy objects
• Not designed for use near sinks, tubs, or wet locations

Fire Safety Disclaimer:

Standard outlet covers are typically made from fire-resistant materials. PLA is not fire-rated.
While the risk of an electrical fire is low, it cannot be completely eliminated. By printing and installing this cover, you assume full responsibility for your safety and any potential consequences. Use this design at your own discretion and install it at your own risk.

If you’re uncomfortable with that, don’t install it. Simple.

Usage & Licensing Disclaimer:

Free to print for personal use

Commercial use requires a commercial license

Selling physical prints or profiting from this model without proper licensing is not permitted

Power responsibly.