A minimal, solid riser designed to raise the Apple Studio Display by 50 mm.

The footprint of this print matches the Studio Display stand base, with subtle vertical fillets to echo Apple’s industrial design. The riser is intentionally simple: a single solid block for maximum stability, ease of printing, and a quiet, unobtrusive presence on the desk.

This model was printed, tested, and photographed in use with an Apple Studio Display.

Print Notes

• Material: PLA (tested)
• Nozzle: 0.4 mm
• Layer height: 0.2 mm
• Walls: 5
• Infill: Gyroid, ~13%
• Supports: None

The design is forgiving and should print well on most printers. PETG and other materials should also work, though they have not been tested.

A felt pad or desk mat underneath is recommended to protect desk surfaces.

Adjusting the Height (Optional)

This model is provided at 50 mm height, which is the size shown in the photos and was tested successfully.

If you’d like a different height, you can easily adjust it in Bambu Studio:

1. Open the 3MF file in Bambu Studio
2. Select the riser model on the build plate
3. Click the Scale tool
4. Disable “Uniform Scale”
5. Change only the Z value to your desired height (for example: 40 mm or 60 mm) 
6. Slice and print as usual

Adjusting only the Z axis preserves the correct footprint for the Studio Display base.
(See the included screenshot for reference.)

Design Intent

This riser is intentionally minimal. It’s meant to disappear visually, add just enough height for better ergonomics, and print reliably without unnecessary complexity.