Elsa Hue Forge 

Guide to print:
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm - The Model is 250x140mm in size (if you wish to re-scale, make sure to not change the Z values)

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm
 

Filaments Used:
     PLA   Black
     PLA   Blue
     PLA   White

This print uses 3 unique filaments

Swap Instructions (see above):
    Start with Black
    At layer #11 (0.96mm) swap to Blue
    At layer #14 (1.2mm) swap to White for the rest.