This is a front panel modification for the Modcase Hyper PC Case from Haydn Bao.

There are two versions, as shown in the pictures.

Version 1 is if you want the frame and ribs in the same color.

Version 2 is if you want the frame and ribs in different colors (no AMS needed)

There are also some minor differences in the geometry between the two.

For version 2, I recommend gluing the frame together first, then the ribs parts together and then you can slide everything into the frame and screw it onto the case.

For both you'd need 8 M3 screws to screw them onto the case, I used M3x12 but you could probably also use some shorter or longer ones.