Ultimate Parametric Pot Riser

Give your plants the airflow they deserve! This fully parametric pot riser lifts your planters, preventing root rot, protecting your floors from water stains, and ensuring proper drainage.

It is designed to fit inside your plant saucers, keeping your pot elevated above stagnant water runoff. Whether you have a tiny succulent or a massive indoor tree, you can customize this model to fit exactly under your pot.

Key Features

• Prevents Root Rot: Keeps the pot bottom dry and allows air circulation.
• Fully Customizable: Change diameter, height, and wall thickness to fit any pot size.
• Airflow Tunnels: Optional "creneaux" (vents) at the base allow excess water to flow out freely.
• Sturdy Design: Reinforced with radial ribs and an inner support ring to handle heavy weights.

How to Customize (Parametric Maker)

This model is designed for the MakerWorld Customizer. You don't need to install any software!

1. Click on the "Customize" button.
2. Adjust the Outer Diameter to match your pot's base.
3. Set your desired Height.
4. Toggle Enable Aeration if you want drainage tunnels.
5. Click Generate and Download!

Print Settings

• Material: PLA is fine for indoor use. Use PETG or ASA for outdoor use or very heavy pots (better creep resistance).
• Layer Height: 0.20mm or 0.24mm (Standard).
• Infill: 15-20% Grid or Gyroid.
• Walls: 3 walls recommended for heavy pots.
• Supports: ❌ No supports needed! Print flat on the build plate.

Default Sizes Provided (STLs)

If you don't want to customize, I have uploaded standard sizes compatible with most common pots:

• Small: 120mm Diameter
• Medium: 160mm Diameter (Standard IKEA size)
• Large: 220mm Diameter

Created with ❤️ using OpenSCAD. Happy Gardening !

If you print this, please share a picture of your plant setup! It helps me a lot.