Command the Evil Eye and become the Lord of All Necromancers

Your hand's shadow leaps forward on its own, commanding you to follow suit and grip the handle of Scepter in front of you. The metal grip is cold to the touch, but a blazing heat pulses up the length of your arm. You see the outline of your bones illuminate bright enough to see through your skin. After years of studying the dark arcane arts of Necromancy, you have finally found the artifact that deals your dominance. The Evil Eye darts around it's bone enclosure. It scans you, measures your worth. Once satiated it grants you it's power: the power to become the Lord of All Necromancers.

They Will All Bow Down To Your Power

The Evil Eye Scepter is a relic of unimaginable power. Bring yours to life with PLA and, some patient assembly, a pinch of glue, and an optional multi-color printer. This entire model may be printed with no AMS as an option but necessitates a single-color eye cornea. 

The Scepter -

Recommended to print in dark greys or blacks to promote a dark magic theme. This section is composed of two pieces; the “Scepter Grip” and “Bottom Spike.” The two are connected via 4 printed clips (clips found on last plate of print profile). This part of the model is meant to resemble a dark twisted metal.

The Bone Crown -

Recommended to print in a bone white color to enhance the bone aesthetic. This section is composed of two pieces; the “Bone Skulls” and the “Spike Bone Eye Orb.” The two connect together with 4 printed clips and then connect to The Scepter with an additional 4 printed clips. This part of the model was designed to resembled decayed bones and dark necromantic fantasy aesthetic. 

The Evil Eye -

This part of the model prints in 3 separate parts that are combined together with glue. 

• The first is the "Eye"," which should be printed in white or any other color you want to serve as the eyeball equivalent to your print. 
• The second is the “Iris,” printed in black or any other color you want in the center of the model. 
• The third section is the “Cornea,” which comes in two varieties: the 2-Color option, designed to resemble a realistic and ever seeing eye, or the 1-Color option, best use for a quicker print or with no AMS or multi-nozzle printers. Recommended colors are those typically associated with evil: reds, blacks, dark purples, etc.

Print yours today and become the new Lord of Necromancers! 

General Print Settings - 

All pieces of the model are printed with 0.2mm layer height except for the cornea. The Cornea is printed at a 0.12mm layer height and with .22mm line width. Supports are used for the model. The print profile includes painted brim ears for stability. 

Build Instructions

The following pictures illustrate a step-by-step build process to put together the various pieces of this model. 

If you're still here, why not check out one of my other models that might be of interest to you?

-Click on an image to go to the model page-