Elden Ring Lesezeichen Hueforge

Elden Ring Lesezeiche im HueForge Style.

HueForge settings:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50x121.94mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

    #080a0d PLA PolyLite Black Transmission Distance: 0.3
    #c00d1e PLA BambuLab Basic Red Transmission Distance: 4
    #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Red
    At layer #17 (1.44mm) swap to Yellow
    At layer #19 (1.6mm) swap to Red
    At layer #20 (1.68mm) swap to Yellow for the rest.

Descrição