Grid Cubu—晶格笔筒

此模型无需支撑可正常打印！

这款笔筒采用复杂的空间网格结构。编织的纹理随着高度变化，让笔筒整体视觉上展现出轻盈和通透的视觉感。

在保证结构强度的同时，也展现出精致而富有几何趣味的美感。

这款笔筒半径40mm,高度105mm。可以根据打印机的尺寸自由调整模型大小。

模型默认打印配置为0.16mm层高，材质为banbu PLA basic。打印时间在6小时左右。

若想获得更好的打印效果，可以调整层高为0.12mm打印时间会增加2~3个小时，可根据需求自行调整。

欲了解更多详情和原创设计，请查看我的小红书：

[https://www.xiaohongshu.com/user/profile/62a3ed160000000021026c00](https://www.xiaohongshu.com/user/profile/62a3ed160000000021026c00)

No support required for successful printing!

This pen holder features an intricate spatial lattice structure. Its woven texture evolves with height, lending the entire piece an airy and translucent visual effect. It maintains structural integrity while exuding an exquisite, geometrically playful aesthetic.

Radius: 40mm | Height: 105mm The model size can be freely scaled to fit your printer’s build volume.

Default: 0.16mm layer height, using Bambu PLA Basic filament

For more details and original designs, check out my Xiaohongshu (Red Not):

[https://www.xiaohongshu.com/user/profile/62a3ed160000000021026c00](https://www.xiaohongshu.com/user/profile/62a3ed160000000021026c00)

Descrição

此模型无需支撑可正常打印！

No support required for successful printing!