Allows the ADT motion sensor to be securely mounted in the corner of the room with multiple screws instead of one flimsy screw with a large gap behind it like the install person uses. Screw this adapter mount to the wall using 2 to 4 #10 screws then screw the sensor's mounting plate to this using 2 #6 screws. Finally, slide the sensor onto its mounting base for a secure hold. 

• Nozzle: 0.4mm
• Layer Height: 0.2mm
• Wall Loops: 4
• Top Shell Layers: 5
• Bottom Shell Layers: 5
• Sparse Infill Density: 15%
• Sparse Infill Pattern: Gyroid
• Supports: No
• Brim: No
• Print Time: 56 min.