Filaments Used:
- PLA BambuLab Basic Black 
- PLA BambuLab Basic Red  
- PLA BambuLab Basic Orange  
- PLA BambuLab Basic Beige  
- PLA BambuLab Basic Yellow  
- PLA BambuLab Basic Jade White  

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #11 (0.96mm) swap to Orange
    At layer #15 (1.28mm) swap to Beige
    At layer #18 (1.52mm) swap to Yellow
    At layer #21 (1.76mm) swap to Jade White for the rest.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.48x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2mm

Remember, if scaling is desired, modify only the x and y axes; the z-axis must remain unchanged.