I have added a pause at layer 11 in case you don't have multiple AMS. You are allowed to print for personal or gift use. You can not print to sell. If you have any feedback or have a suggestion of a print you would like to see, feel free to comment or message me. Happy printing!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x147.88mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 5
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue
    At layer #10 (0.88mm) swap to Red
    At layer #16 (1.36mm) swap to Yellow

Border Only Colors from here until the end.
    At layer #20 (1.68mm) swap to Jade White for the rest.