This is a 2-inch tiny-whoop frame. It weighs about 16g and supports both 20×20 and 30×30 stacks, with battery mount and TPU battery straps.

I originally designed it around a 20×20 stack I had lying around, so the bottom plate is a separate, screw-on piece. If you prefer, the files can be easily edited to make it part of the main frame.

The print was done in eSUN PLA+, and it turned out to be surprisingly tough for its weight.

My setup: HGLRC Spectre 1202.5 motors, 450/660 mAh 2S LiPo, Aocoda F722 stack, TS5823 200 mW VTX, HGLRC 2.4 GHz ELRS receiver, and Gemfan 2023×3 props.

I’ll probably be adding a canopy design in a future update.