This is a remixed version of the Borg Cube P1P mod created by neil3dprints. It is designed to fit the Flashforge AD5M.

Update 1/23/2026: Doors file has been added. It may require a slight bit of tweaking by the end user. I tried my best to get them to work correctly but they still tend to hang up a bit when closing.

There are detailed instructions on the original model's page, just follow those steps as they are pretty much the same. Please note that you will need some double sided tape so the touch screen will stay in place. I just used 3M double sided tape for mine. If you have any issues with any of the parts, please feel free to shoot me a message and I will try to get them fixed as soon as possible.

I originally had the Flashforge enclosure on my AD5M, so I just reused all of the screws from it and the top lid. If you do not already have that enclosure, you will just need to get a bunch of M4x6 screws and one M4x10 (if you chose to use the side spool holder that I provided.

THIS MOD USES A TON OF FILAMENT! LIKE 5KG+!

WARNING This is not a full enclosure and is not intended to be a full enclosure. I do NOT recommend printing exotic filaments like ABS, ASA, etc, with this MOD installed.

Disclaimer…. Please note that you are installing this MOD at your own risk. Any problems or damage caused by the installation may not be covered by the printer's warranty. Also note, I am not personally liable for any problems or damage caused by this installation of this add on.