Hello and welcome to my first post.

ModuLight is a modular lamp powered by an LED strip.
My version is 7 modules high, but the design is fully modular — you can build it with 2 modules or more, depending on your preference.

Below you will find the manual for printing and assembling the lamp.

Printing Instructions

You need to print each part once, except for:

• MainBody
• MainPipe

These two parts must be printed (n − 1) times, where n is the number of modules you want to build.

Required Parts

You will need the following components:

• LED strip (USB-powered, preferably USB-A so the cable can be routed through the center hole)
  • 7 moduls 3m
• Ø30 mm wooden rod
  • Length calculation:
    125 mm + 100 mm × (n − 1)
    (n = number of modules)

Example:

For a 7-module lamp, I used:

• A 725 mm long wooden rod
• The LED strip wrapped one rotation every 30 mm

Diffuser

As a diffuser, you can use baking paper:

• 3 layers worked best for me

• Tested with 2700 K warm white LEDs

   

  Thank you and happy Printing!