If you'd like to paint the Stith ring like I did, you can print it in any color and paint it. If you don't want to paint, use AMS. You can change the colors if you have other filaments. I used basic PLA colors from Bambu. Below is a link to the Labu bu ring, which comes in various finger sizes. If you need a specific size, please let me know; I'll be happy to add a smaller or larger size. I used glue to assemble the ring. Good luck!

How I print it :

NOTE! : OTHER SIZE RING HERE :
[https://makerworld.com/pl/models/1611002-labub-u-ring#profileId-1699438](https://makerworld.com/pl/models/1611002-labub-u-ring#profileId-1699438)

NOTE!: You need to use a 0.2 nozzle. If you have any doubts on how to change it
 correctly, I recommend the video below.

You won't be able to print this if you have a problem with the first layer or a dirty plate. Below are links to how to calibrate your printer and check this!



[https://makerworld.com/pl/models/1854403-printer-bed-leveling-calibration-plate-a1-a1mini#profileId-1982721](https://makerworld.com/pl/models/1854403-printer-bed-leveling-calibration-plate-a1-a1mini#profileId-1982721)

[https://makerworld.com/pl/models/2064419-printer-bed-leveling-calibrate-test#profileId-2229217](https://makerworld.com/pl/models/2064419-printer-bed-leveling-calibrate-test#profileId-2229217)