Socket wrench for arcade buttons deep enough to cover the entire screw thread of the button. Perfect for when you have to losen the nut from an indent where you can't get your fingers in and don't have a (large enough) open socket wrench.

There are 3 variations depending on how much space you have available to work in:

• One with a handle to one side
• One with the handle as a T (untested)
• One with just finger nubbins

I used the one with the handle to losen/tighten the first/last bit, but found the nubbins version much nicer for the rest of the thread so you don't have to keep repositioning.

Original design was made with ChatGPT to generate the OpenScad file. It required some more tweaking to get the sizing right. I've included the OpenScad for the original handle and the nubbins version. They're far from perfect to work with, but it was a one time thing for me, however hope that this can still be useful for someone else.

Was originally designed for: [https://www.pinballshop.nl/virtual-pinball/arcade-and-pinball-buttons/pushbutton-1.6-inch-square-large-bulb-led-light-amber-blue-green-red-white-yellow/](https://www.pinballshop.nl/virtual-pinball/arcade-and-pinball-buttons/pushbutton-1.6-inch-square-large-bulb-led-light-amber-blue-green-red-white-yellow/)

Would recommend printing in PETG with 15% infill for a strong handle.