Fits All Laptops & Tablets

This isn't your ordinary device stand, as this stand is parametric. Meaning you input your device thickness into the generator, then it outputs the model with a perfect fit for you. Because of the perfect fitment, the stand is extremely stable, and holds your device nearly vertical. The Print has raised areas inside the stand for a low contact to your device, reducing the risk of scratching. If you want to completely kill the chance of scratching your device, you can apply some foam tape from Bambu Lab onto the ridges to pad the model. You can also use this tape as a nonslip feet option for the bottom. The application area is highlighted with a slight indent underneath the model. Not only is this a functional print, it also has a sleek minimalist look that can be amplified with fuzzy skin.

Extra Notes

This model has an option to use foam tape to protect your device. You can find the tape in an affiliate link below. If you choose to use the link below to get your foam tape, it supports me as a creator. Thank you. 

The generator is very intuitive. I just have a few notes on it.

First, you'll need to tell the generator on the MakerWorld website the thickness of your device. The generator adjusts the offset automatically. I strongly recommend getting this measurement from the manufacturer, unless you're using a case. Second, the generator will need to know if you're using the recommended foam tape. 0 = no, foam tape will not be used, 1 = yes, foam tape will be used, 2 = yes, foam tape will be used with added offset for grippy cases. The second option helps the stand not come up with your device if you're using a grippy case.

Now you've got your model. It’s time to slice it. I recommend using the first print profile and replacing the model inside the print profile with the one you generated. This way, you use all the recommended settings. If you'd like to use fuzzy skin on your generated model, refer to the GIF video below.