Mounting bracket for Microsoft Surface 10in tablet. 

• Base part attaches to the wall with two screws. The distance between the screws is 3-9/32" (84mm, standard US Box Mount).
• The other part goes to the tablet's back with double-sided tape (I used 3M Scotch 4910 VHB)

Then the tablet slides to the base.


_____________
Update after a couple of weeks of use: 
The wall plate has warped slightly. I suspect the heat from the tablet is too much for PLA, so it isn't the best choice here. I suggest using a more heat-tolerant material like ABS, ASA, or PETG.