Meet the minimalist Table Clock “Rock”

The clock is designed to stand as a decorative piece on your desk. 

This Table clock has a sleek, natural rock-feel mixed with a Scandinavian minimalist vibe.

Organic stone texture meets the unnatural but functional square shape - a quiet, functional statement for any modern space.

The clock has slightly slanted sides, this gives the clock face a slight  tilt upwards for more visibility at a quick glance.

Choose a black color on the Clock for a more bold feel!

Dimensions: 

Clock W: 9,8cm

Clock H: 7,2cm

Clock thickness: 2,3cm

Total thickness with hands protruding: 3,5cm

| Quartz movement | 

This clock uses the Clock Components Kit 011 from Bambu Lab, find it here: [https://eu.store.bambulab.com/products/clock-components-kit-011?id=41823200215176&modelId=134036](https://eu.store.bambulab.com/products/clock-components-kit-011?id=41823200215176&modelId=134036) 

This design does not require glue or fixings. 

For best results, thoroughly clean the build plate with soap and hot water to minimize print failures (and no fingerprints on the plate after cleaning!).

 Installation of the parts is simple (see assembly steps further down): 

Watch my shorts on this Clock Design: 

(Video live Jan 15  -26)

*pssst!* my Instagram might be worth a look: (@makers_designjournal) ….swing by to see what I've been up to lately. I post most of my projects there. [https://www.instagram.com/makers_designjournal/](https://www.instagram.com/makers_designjournal/)

Compatibility:

Specifically designed for Bambu Lab Clock Components Kit 011 but can probably work with other clocks but make sure to measure carefully first though!

Materials:

The Clock Components Kit 011 uses 1 PC AA-battery

The minute- and hour hand are precision parts where the holes in them are designed to attach to the clock shaft with a slight press fit and if you do not have your printer Properly calibrated, for example if your printer tends to print your parts with a so-called “elephant foot” (i.e. your parts are always slightly larger towards the bottom, at the first layer), the minute hand part will become too tight in the fit to the clocks' shaft (the male).

In the 3mf I have preset elephant foot compensation to 0.25mm

If having struggle I suggest a 0.35mm elephant foot compensation setting and also try to scale it up (in % increments in XY-plane (i.e. to 101% 1st try, then 102% 2nd try)

See my other clock design for assembly steps:
Korall Table Clock (Clock Components Kit 011)

Please kindly take a moment to show your support by giving this a LIKE! If you download this it would be really cool to see photos of your make(s). =D

3D Designed with: Fusion 360

All objects are designed by me!

THIS 3D OBJECT HAS BEEN PRINTED AND TESTED

If you have any questions, concerns as well as suggestions for improvements regarding this model please do not hesitate to contact me.

If you managed to read this far - yeah for you! 💪

Once Again: please kindly take a moment to show your support by giving this a LIKE and I also hope you find it interesting and valuable enough to boost it! If so: thank you so much for your support and I hope you enjoy it. 🙏 This support is truly appreciated and will greatly help me in my future endeavors! 😊