click on the banner to support me or get commercial license to be able to sell prints

*be honest, respect someone's work*

To fit on A1 mini without risk, size it about 5mm less from top and bottom ( change only X and Y axis, do not change Z axis)
Or just turn it at an angle to fit only one bookmark at a time.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Use small flame torch to get rid of small impurities
The Model is 50x180mm in size

Filaments Used:
    #000000 PLA Kingroon Black  Transmission Distance: 0.4
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #01b3ff PLA+ Sunlu Sky Blue  Transmission Distance: 4
    #ecffff PLA Kingroon White  Transmission Distance: 4.7
This print uses 4 unique filaments but feel free to use yours, play with colors to get different results ;)

Swap Instructions:
    Start with Kingroon Black
    At layer #8 (0.72mm) swap to BambuLab Basic Blue
    At layer #13 (1.12mm) swap to Sunlu Sky Blue
    At layer #18 (1.52mm) swap to Kingroon White for the rest.

Thank you for trying my model ;)
Find all my bookmarks under this link :

[https://makerworld.com/collections/8505404](https://makerworld.com/collections/8505404)