I increased the size of the housing to max to fit on a 256 build volume. the door and all the part is the same.
I also arranged the parts on fewer build plates and mainly separated the color parts.

Another change I made is insetting the color of the dial. that way the dial face can be the texture of the plate. The original has raised letters. forcing top surface.

I also simplified the acrylic plate only having holes where needed.

There is very little support needed. But it is needed.
all the instructions are the same as the original. There is obviously a lot of work involved. it is a chalanging build. make sure you remove any elephants foot (wider first layer. This can be a problem with all the center pins. rolling free. After I removed the elephant foot, I used a 5mm dia pin in my drill to give it a nice fit.

see the original for assembly instructions:
[https://makerworld.com/en/models/159986#profileId-175680](https://makerworld.com/en/models/159986#profileId-175680)