If you like this print and would like to donate a boost, that would be much appreciated.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Gray Transmission Distance: 2.5
PLA Silver Transmission Distance: 3
PLA White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #12 (1.04mm) swap to Silver
At layer #18 (1.52mm) swap to White for the rest.