Dummy 13 models bring me tons of joy, having a growing army of them around my workspace. I decided to design a few remixes and am sharing them in case others want to print these versions.

Joining my Ryobi remix to expand my Dummy 13 tool brand family, this remix is based on [https://makerworld.com/en/models/638587-dummy-13-version-1-0#profileId-564186](https://makerworld.com/en/models/638587-dummy-13-version-1-0#profileId-564186) and is modeled after my brother's tool brand of choice at home, DeWALT, with an inset in the chest for the logo, a custom stand with inset for the DeWALT logo as well, and I even included miniature DeWALT colored Drill and Driver that I designed myself.

If you are new to Dummy 13 please check the original model for detailed information related to Dummy 13, assembly etc.

The frame (and optional stand) is recommended to be printed in PETG for improved strength and durability, with all armor and accessories being PLA.

There are lots of small parts, so if you are using a non-sticky plate, you may consider using glue stick on your plate, i do this for all my prints and the adhesion is almost flawless this way. I do have periodic adhesion issues with the forearm armor since they have thin surface area touching the bed, so be warned :).

• Armor Color - I used Sunlu Vivid Yellow PLA for the armor, it is a pretty close color match.
• Chest and Logo - The logo badge should press/snap into the inset on the chest, but be careful as you could break the chest piece putting these together, be sure to support the front chest piece while combining them; glue should be optional.
  • Chest Logo Badge - I recommend 0.2mm nozzle for the chest badge for the fine detail in the logo letters, otherwise it is muddled. Everything else prints well with 0.4mm nozzle.
• Adhesion - I use Bambu glue stick on the plate for most of my prints, some of these small pieces may come loose, so be warned.
• Stand - I included an optional stand in this print with inset cutout for an optional DeWALT logo badge you can press fit into it.

If you like DeWALT, check out my DeWALT desktop cornhole remix here: [https://makerworld.com/en/models/2190690-dewalt-faceplate-for-desktop-cornhole](https://makerworld.com/en/models/2190690-dewalt-faceplate-for-desktop-cornhole)