I tried the other command strip mount but found that the rotating lock would not release reliably with PETG or PCTG. This is also based on the beta locking snap but modeled so the the rotor lock is printed separately.

Please let me know how it works for you. I'm still testing it as well.

Required Materials:

• Uses Medium Command Strip refills: [https://a.co/d/hXfvweQ](https://a.co/d/hXfvweQ)

Provided Components

• 1-, 2-, and 4-snap versions
  • 4-snap version can support 3 command strips. The 3M documentation says each strip supports up to 3 lbs.
• flat lock + cover

Compatible with SwapSnap Rotors (openConnect & MultiConnect)

Instructions:

Push the rotating lock in place.
2. Attach the command strip. I've textured it slightly to help improve the adhesion.  Red side attaches to the mount. Black side is for the wall.
3. Attach the grid to the mount.
4. Rotate to lock. Diagonal = locked.
5. If you use the flat lock, you can add the cover.
6. Position it where you want it, remove the black text backing, attach to the wall.