Sometimes the inner pot you have is not as tall as the outer pot you want to put it in, causing your plant to be hidden a bit. This model fixes that. It elevates the inner pot. Also; some plants don't like to have wet feet. This model helps with drainage, preventing root rot.

This is my fourth model on MakerWorld, so feedback is welcome!

Printing notes

• I've used a Bambu Cool Plate Supertack as the build plate for printing this, don't forget to adjust it in the .3mf if you use another build plate.
• The print sequence in the .3mf is set to ‘print by object’ to avoid visible layer lines. Disable it if you want to print as much as possible on one build plate.

Dimensions
Height: 2cm - 5cm (I've added taller legs in the download section, all print profiles contain the 2cm legs)
Diameter: 10.4cm, 4 cm and 8cm available via print profiles

Assembly
Put the little legs in the top carefully, optionally add a dot of glue if needed. 

If the pot insert wobbles one of the legs probably isn't fully inserted. I sometimes gently hit it with the back of a screw driver when that happens.

Model in photos is printed on a Bambu P1S, with 0.4mm default nozzle, on a Bambu Cool Plate Supertack. The color used is Bambu PLA Matte Dark Green (11501). The plant in the photo is a newly sprouted “Ceropegia woodii” (String of Hearts).