This is my parametric stacking box!

Model:

You can customize this stacking box to your desired measurements. Lets say you want to fill a certain space, here you go, you can customize it and fill the exact space you have. 

Customizer:

Customize length, width, height and wall thickness. 

The length should be not smaller than 80mm

The height should be not smaller than 35mm 

The wall thickness needs to be within 2,6mm and 3,6mm.

If you use these boxes in a workplace environment, then you will bump up the wall thickness for strength.

Print profile:

I set up the print profile with a box of 100mm length x 55mm width x 50mm height.

There are no supports needed!

Filament:

This model can be printed in any filament you like.

I used PLA for ease of printing, PETG will be a good choice also. ASA will be the best choice for strength in a workplace environment.